304 Stainless Steel vs 316 Stainless Steel

Corrosion resistance varies by grade – 304SS vs 316SS

http://www.reliance-foundry.com/blog/304-vs-316-stainless-steel#gref
Stainless steel pipe and tube stack
304 and 316 are the two most common grades of stainless steel. Judging by the name, you might assume that stainless steel never stains—but you’d be wrong.

Stainless steel stains less easily than other iron-based metals, but it’s not literally “stainless”. Just like standard steel, stainless can get marked up by fingerprints and grease, develop discoloration, and eventually rust. The difference is resilience. Stainless steel can withstand much more time and abuse before showing signs of wear.

All steels have the same basic iron and carbon composition, but stainless steel also contains a healthy dose of chromium—the alloy that gives stainless steel its famous corrosion resistance.

And this is where things get complicated. There are multiple grades under the stainless steel umbrella, each with slightly different alloy composition, and therefore slightly different physical characteristics.

Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous and selenium.

The two most common stainless steel grades are 304 and 316. The key difference is the addition of molybdenum—an alloy which drastically enhances corrosion resistance, especially for more saline or chloride-exposed environments. 316 stainless steel contains molybdenum, but 304 doesn’t.

For outdoor furnishings like rails and bollards, stainless steel is an ideal corrosion-resistant material, but it will only withstand long-term exposure if the grade is appropriate for its environment. 304 is an economical and practical choice for most environments, but it doesn’t have the chloride resistance of 316. The slightly higher price point of 316 is well worth it in areas with high chloride exposure, especially the coast and heavily salted roadways. Each application for stainless steel has its own unique demands, and needs a stainless steel that’s up to the task.

Natural corrosion resistance

Red rust edge
Iron oxide, also known as rust, is red and flakey. Stainless steel has a natural rust resistance.

Corrosion is a natural phenomenon. Pure elements always react with the surrounding environment, which is why so few elements are naturally found in their pure form. Iron is no exception.

In wet or humid conditions iron reacts with the oxygen contained in water to form iron oxide, also known as rust. The red flaky oxide deteriorates easily—exposing more material to corrosion. Iron and standard carbon steels are highly susceptible to this type of corrosion.

Stainless steel has the innate ability to form a passive layer that prevents corrosion. The secret?

Chromium.

The chromium found in all stainless steels reacts quickly with oxygen environments, much the same as iron. The difference, however, is that only a very fine layer of chromium will oxidize (often only a few molecules in thickness). Unlike flaky and unstable iron oxide, chromium oxide is highly durable and non-reactive. It adheres to stainless steel surfaces and won’t transfer or react further with other materials. It is also self-renewing—if it’s removed or damaged, more chromium will react with oxygen to replenish the barrier. The higher the chromium content, the faster the barrier repairs itself.

Once oxidized, or passivized, stainless steel typically rusts at a very low rate of less than 0.002 inches per year. When kept in its best condition, stainless steel offers clean and bright surfaces ideal for many building and landscape designs.

304 Stainless Steel

Stainless steel provides an attractive, clean finish with low maintenance cost. 304 stainless steel is the most common form of stainless steel used around the world, largely due to its excellent corrosion resistance and value. It contains between 16 and 24 percent chromium and up to 35 percent nickel—as well as small amounts of carbon and manganese. The most common form of 304 stainless steel is 18-8, or 18/8, stainless steel, which contains 18 percent chromium and 8 percent nickel. 304 can withstand corrosion from most oxidizing acids. That durability makes 304 easy to sanitize, and therefore ideal for kitchen and food applications. It is also common in buildings, décor, and site furnishings.

304 stainless steel does have one weakness—it is susceptible to corrosion from chloride solutions, or from saline environments like the coast. Chloride ions can create localized areas of corrosion, called “pitting,” which can spread beneath protective chromium barriers to compromise internal structures. Solutions with as little as 25 ppm of sodium chloride can begin to have a corrosive effect.

316 Stainless Steel

Water droplets on a stainless steel rail
316 grade is the second-most common form of stainless steel. It has almost the same physical and mechanical properties as 304 stainless steel, and contains a similar material make-up. The key difference is that 316 stainless steel incorporates about 2 to 3 percent molybdenum. The addition increases corrosion resistance, particularly against chlorides and other industrial solvents.

316 stainless steel is commonly used in many industrial applications involving processing chemicals, as well as high-saline environments such as coastal regions and outdoor areas where de-icing salts are common. Due to its non-reactive qualities, 316 stainless steel is also used in the manufacture of medical surgical instruments.

Alternative 300-series grades can contain up to 7 percent molybdenum. They provide even better chloride resistance, but such heavy-duty resistance is only necessary in industrial or high concentration exposure conditions.

Versatile applications

Both 304 and 316 stainless steels (as well as other 300-series grades) use nickel to maintain an austenitic composition at lower temperatures. Austenitic steels ensure a versatile balance of strength, workability and corrosion resistance, making them ideal for outdoor architectural and landscape applications. The benefits of stainless steel include a long service life that will retain an attractive, clean finish with low maintenance cost. It also maintains a high value if and when equipment and parts need to be decommissioned.

Zanda Architectural Hardware offers a selection of 316 stainless steel pull handles that are suitable for use on timber doors, aluminium doors and glass doors. They are commonly used on hinged doors, pivot doors and sliding doors making them the ideal choice for your commercial or residential project. Our stainless steel products use only 316 grade material for the best performance in almost any Australian environment.

On top of our Pull Handles, we also offer a range of Flush Pulls, Door Closers, Door Hinges and other door accessories in Stainless Steel. Contact us on 1300 ZANDA1 for any further information.

Polo Pull Handle

Sources

Image credits

  • 304 and 316 stainless steels are manufactured in many common forms: fleecetraveler, CC by 2.0, via Flickr
  • Chromium oxide offers a reflective finish that protects materials beneath: FreeImages.com/Ryan Stotts